Header

Header
makarovshare.blogspot.com

Monday, January 5, 2015

How to Overcome Smartphone Or Gadgets That Submerged Water

 
How to Overcome Smartphone Or Gadgets That Submerged Water
As you all know the capital city of Jakarta is facing a flood disaster that attack. This news is reportedly rampant both through digital media or print media. Everyone there is now busy saving goods - goods. Not a bit too wet gadget device even submerged into it. For this time I will give you a little information on how to cope when Smartphone, or any gadget you experienced a similar incident, he tips:

1. Take the device out of the water

Even though it looks closed, but in fact the water could have easily fit into your device. Therefore if your device falls into a puddle of water, immediately remove it and immediately turn off the device to prevent surge. Do not turn on your device before being dried.

2. Immediately dry your device, then remove any cover and battery

The drying process is the most important process. There are various important components in the device gadget that can survive even though exposed to the water, as long as it does not get power from the battery. To check whether there is a component that is damaged by water, check the corner - a corner around the battery. There will be a circle or a small white box, if the area turns pink or red, it means there is damage due to water seepage to the components of your device.

3. Remove the SIM card and memory card

The data and information contained in the SIM Card and Memory Card is sometimes more important than the device itself. Although these two components are relatively resistant to water, should be immediately removed and dried to prevent corrosion on the connector box.

4. Remove all accessories

Berbgai accessories can inhibit the drying process. immediately off all accessories such as headsets or headphones, including casing, too, detachable for the drying process can be maximized.

5. Dry with a Vacuum Cleaner (Vacuum Cleaner)

To facilitate drying of water on Baian in your device can use a tool such as a vacuum cleaner or a Vacuum Cleaner. Point the tip of the vacuum cleaner to various corners of the approximately 20-30 minutes. But do not direct the point Vacuum Cleaner too close because the device contains the flow of electricity and is very harmful to the components of the device even more dangerous than the water though.

Do not use a hair dryer or Hair Dryer or any objects that are breathed aingin, despite the cold gives a chance to position the tool - the tool can still push the water and increase the humidity level further into the phone so that potentially aggravate the damage.

6. Dry with using the material absorbs water

You can insert your device into a bowl of rice. Make sure the device is submerged rice and leave it for one night. Or you can also use silica gel or other moisture absorbent. in order to more effectively rotate the position of your device every few hours so that no stagnant water still in it.

7. Turn on your device

after the device you really - really dry reinsert the battery, SIM Card and Memory Card and various accessories such devices. then turn on your device. If your device does not turn on, try connecting your device to the adapter Charger, if the process is successful your device battery may be damaged. But if this method still does not work immediately take your device to a service center nearest to immediately handled by the more professional.

That was a few tips if you Gadgets perangakat submerged into water puddles, hopefully that information can help to you. To find other interesting information you can instantly Smartphone Or How To Overcome The Submerged Water Gadgets

0 komentar :

Post a Comment